The Indoor Door Mats serve an important purpose to trap dirt, debris, moisture and anything else you may track in on your shoes, preventing it from being trekked all over your floors. However, the very nature of what makes door mats effective for this purpose – absorbing moisture and other substances – also contributes to their slipperiness.
Why Door Mats Slip and Slide
There are a few key reasons why door mats can be prone to slipping and sliding around on flooring surfaces if not properly addressed:
Moisture Absorption
By design, doormats effectively trap moisture, dirt and debris from shoes. However, constantly absorbing water and remaining damp in entryways causes issues over time. Door mat fibers become saturated with trapped liquid. Once fully saturated, the backing material loses much of its natural friction against the flooring.
Fiber/Backing Degradation
Continual moisture exposure degrades some fiber and backing compositions. Frequent wetting and drying destroys the texture that provides traction. Nylon, cotton and woven mats are especially susceptible to this breakdown compared to rubber or PVC.
Smooth Flooring
Hard, polished surfaces like tile, stone, vinyl and wood lack natural texture for Coir Door Mats underside to grip. This is a major contributing factor. Slipperiness occurs predominantly on very slick, non-porous flooring.
Weather Conditions
Wet weather exacerbates the first two issues. During rainy or snowy periods, mats absorb an extreme amount of moisture daily. This accelerated saturation and degradation over time leads to slippery failures
Steps to Prevent Door Mat Slipping
There are several effective steps homeowners can take to help prevent doormats from slipping and sliding around:
Use a Non-Skid Backing
One of the most important factors is the type of backing material on the doormat itself. Mats made with rubber, latex or non-skid polyvinyl chloride (PVC) backing provide much better traction than standard cloth or nylon backings. The texture of these materials does not degrade even when wet, maintaining friction against flooring. Look for mats specifically labeled as “non-slip” which denotes this feature.
Add Traction Strips or Dots
For doormats that already have a smooth cloth backing, you can improve the grip by applying rubber traction dots or strips. Peel-and-stick options are available, making it easy to dot the underside pattern for maximum coverage. This adds necessary texture to prevent sliding on all common flooring types like hardwood, tile and marble.
Weigh Down the Corners and Edges
Larger entrance rugs and doormats can shift around more when walked on due to their size. To counteract this, place weights like decorative stones on the outer edges. This extra anchoring at the perimeter keeps the mat from moving inward with foot traffic. Wall-mounted corner holders are another effective solution for gripping the mat edges in place.
Proper Drying and Storage
Be sure to remove doormats periodically, such as weekly, to air them out. Leave in a sunny spot to thoroughly dry between uses. Over time, trapped moisture can build up inside the fibers if continuously left in an entryway. Outdoor or in-garage racks allow ventilation while not in use. Rotating multiple mats also prevents saturation.
Use Double-Sided Carpet Tape
For smoothing flooring surfaces, lay down carpet tape along the underside edges and corners in a crisscross design. This creates a more permanent bond through strong adhesive. Replace the tape as needed when it begins to lose stickiness over months of use.
FAQs About Preventing Doormat Slipping
Q: What flooring surfaces are doormats most prone to slipping on?
A: The smoothest, hardest flooring without much texture tends to be the most slippery for doormats. This includes sealed hardwood, ceramic tile, polished stone and vinyl. Doormats often have better traction on softer surfaces like unfinished hardwood, carpet and outdoor decking.
Q: Are natural fiber doormats less likely to slip than synthetic?
A: In some cases, yes. Materials like coir (coconut fiber), jute and sisal have a rougher, more porous texture compared to nylon and polypropylene. This extra surface friction provides better slip resistance. However, natural fibers also absorb moisture more, degrading traction faster over time.
Q: Where can different doormat traction aids be purchased?
A: Rubber backed mats, plus peel-and-stick traction dots and strips, can be found at most home improvement stores, flooring outlets, and online retailers. Decorative weights are available at garden centers. Corner/edge brackets typically come with purchase of super-sized rugs.
Q: Are there any DIY doormat traction solutions?
A: Possible DIY options include gluing coffee grounds, sand or kitty litter to the underside for extra abrasion. Cutting thin rubber strip or tub mat remnants into shapes and sticking them on also works. Strategically placed double-sided rug tape is effective and low-cost.
Conclusion
There are effective solutions homeowners can implement to help prevent doormats from slipping and sliding across entryway floors. While moisture absorption and smooth flooring surfaces naturally contribute to mat slipperiness over time, taking proactive steps can significantly reduce or even eliminate this problem. Choosing doormats made with quality, slip-resistant backing materials like rubber, latex or non-skid PVC is key.
Also Read: https://coolcoder.org/
More Stories
FMEA: Enhance Reliability and Safety
Things to Know About Sheds Assembly
Guide to Car Key Services in Birmingham